There Is No Disk in Drive E Insert a Disk and Then Try Again Sata Hard Drive 1tb
Back in Oct when I set up my new Ryzen PC, I thought it might be good to become an NVME SSD for the older desktop every bit well – I'd pinched all the drives from it for the new PC, and I didn't want to be stuck using my erstwhile, tedious HDD. NVME SSDs were quite cheap at the time, so I got myself a second paw 500GB Samsung OEM ane commonly found in laptops.
However, there was a problem. The old PC (an Alienware X51 R2) didn't have a M.ii slot to accommodate an NVME bulldoze, which is mutual on systems of that age (circa late 2013). Fortunately, at that place is a way to get these super-fast storage devices working on older desktop PCs (unfortunately this won't work on laptops).
This volition work for booting both Windows and Linux, on systems with either BIOS or EFI/UEFI firmware. Similar steps can exist followed for rEFInd, only that will only boot EFI/UEFI-based systems, whereas Clover tin kick both BIOS and EFI/UEFI systems. You'll encounter reference to rEFInd in the comments, but this is because I somehow got dislocated and thought I was using rEFInd instead of Clover. The mail has since been updated.
M.2 and PCI Express
So first I should signal out that some M.2 drives really use SATA, but I wasn't interested in those equally I could merely connect a SATA SSD. I was really interested in the PCI Express/PCIe drives. Fortunately, whatsoever contempo desktop will use PCIe for the graphics card, and my onetime PC was no exception. If you're using a standard ATX motherboard, you may well take multiple PCIe slots, but in my case I had to ditch the graphics carte, which was an acceptable compromise for me because I wasn't using it anyway.
In order to connect an M.two drive to a PCIe slot, there are various adaptors available. In the terminate, I went for this one considering it was inexpensive and it looked like I could boot from it – some other adaptors have caused problems with this.
Installing the adaptor
Installing the adaptor is normally pretty easy. I don't have detailed steps for your system, but I can show you how it worked on mine. The process varies depending on your case, but it's usually equally simple equally taking the side panel off your example, removing a blanking plate, and then inserting and screwing the bill of fare in. Notation that you'll need to insert your NVME SSD into the menu outset.
Booting from the NVME SSD
If you want to kicking from the drive, you'll probably now run across another problem: when you lot power on, your system won't "run into" the drive as a kicking device.
There are a number of solutions to this problem, just the safest one (and the one I chose), is to install Clover to a USB stick, and have the PC use that as a boot carte. With the right commuter, Clover can then detect your new SSD and kick from it. This sounds a bit complicated, but it's piece of cake to gear up. You lot besides only need a small USB stick – an one-time 512 MB or i GB stick will be just fine.
EDIT: Yous can download an prototype I made to then write to your USB stick with no farther steps from https://www.hamishmb.com/files/Downloads/misc/Clover.img.7z. You may demand 7-zip on Windows to extract this.
Clover can be downloaded from https://github.com/CloverHackyColor/CloverBootloader/releases, and Refind can be downloaded from http://world wide web.rodsbooks.com/refind/getting.html. You want the ISO or "USB wink drive paradigm" pick, which yous can and so write to the deejay using a tool like GNOME Disks (Linux), Rufus (Windows), or Etcher (all OSes).
Once written to your USB stick, you're almost done but first you need to download the NVME driver. You can search for "NvmExpressDxe.efi", or you can download this one that I used, and have tested to work.
Once you've got your driver, navigate to your USB drive and identify it in
EFI -> CLOVER -> drivers -> BIOS
and
EFI -> CLOVER -> drivers -> UEFI
These locations are similar for rEFInd if I retrieve correctly.
At present yous tin safely squirt your USB stick and kicking the new automobile from it. You lot may need to select the USB stick as a kick device in the firmware setup, or information technology may just kicking from information technology automatically. You'll exist presented with a boot menu, and you should now install your operating organisation. Your installation media will announced in Clover'southward boot carte.
Installing the Os
This varies depending on your setup, whether y'all're installing Linux or Windows, or whether yous're cloning an existing disk. As such, I won't really cover this here, just as long as you kickoff the installation media from Clover (especially if y'all're installing Windows), it should all work as usual. One time installed, your OS will appear in Clover'southward kicking menu, where you can boot it.
Summary
This has been a slightly longer post, but I hope it is useful. The steps involved can have a while, but they are quite uncomplicated to follow. Equally always, if you demand me to clarify anything, allow me know in the comments.
That'south information technology for now, only stay tuned!
armstrongsularoat.blogspot.com
Source: https://www.hamishmb.com/blog/booting-nvme-older-pc-refind/
0 Response to "There Is No Disk in Drive E Insert a Disk and Then Try Again Sata Hard Drive 1tb"
Enregistrer un commentaire